굴삭기 감속기 시스템의 기본 이해

The Foundation of an Excavator Reducer

An excavator reducer is a crucial power transmission mechanism that uses a series of gears to reduce the motor’s rotational speed to the desired level while simultaneously increasing torque. This system allows heavy machinery like excavators to operate efficiently and effectively.

There are several types of reducers, which can be categorized based on their transmission type:

• Gear Reducers
• Worm Reducers
• Planetary Reducers
• Combined Reducers

Additionally, reducers can be classified according to the number of transmission stages:

• Single-Stage Reducers
• Multi-Stage Reducers

And by the shape of the gears:

• Cylindrical Gear Reducers
• Bevel Gear Reducers
• Bevel Cylindrical Gear Reducers

Moreover, based on the layout of the transmission, reducers can be:

• Unfolded
• Split
• Coaxial

When it comes to lubrication, gears typically use either oil pool lubrication or circulating lubrication. It’s essential to regularly check and replace the lubricating oil to maintain optimal performance. For newly installed excavator reducers, it’s recommended to replace the oil after the first 10-15 days of operation. Subsequently, the oil quality should be inspected every 2-3 months, and if it doesn’t meet the required standards, it should be changed immediately. As a general rule, the oil should be replaced at least every six months to ensure the machinery remains in good working condition.

A Comprehensive Analysis: Causes of Gear Pitting and Peeling in Gearboxes (Excavator Reducers)

2.1 What Causes Gear Pitting and Peeling in an Excavator Reducer?

Gear pitting and peeling in excavator reducers can be attributed to a variety of factors. Let’s delve into the key reasons:

Material, Hardness, and Defects

One of the primary causes is the material from which the gears are made. If the material does not meet the required standards, it can significantly affect the gear’s performance. Additionally, the hardness of the gears is crucial. If the gears have low hardness after heat treatment, it can reduce their contact fatigue strength, making them prone to pitting and peeling. Furthermore, any surface or internal defects within the gears can also lead to insufficient contact fatigue strength, exacerbating the problem.

Poor Gear Accuracy

Another significant factor is the accuracy of the gears. Inaccuracies that occur during the gear processing and assembly stages can result in a range of issues. For instance, poor meshing accuracy and motion accuracy can lead to uneven load distribution and increased wear. Additionally, errors in the center distance of the shell of circular arc gears can cause misalignment, further contributing to gear pitting and peeling.

Inadequate Lubricating Oil

The type and quality of lubricating oil used are also critical. Using the wrong grade of lubricating oil, oil with low viscosity, or oil with poor lubrication performance can cause significant problems. Adequate lubrication is essential to reduce friction and wear between the gears. When the lubricating oil is not up to standard, it fails to provide the necessary protective film, leading to increased contact stress and surface damage.

High Oil Levels

Interestingly, even excessively high oil levels can be problematic. High oil levels can lead to increased oil temperatures. As the temperature rises, the viscosity of the lubricating oil decreases, which negatively affects its performance. Lower viscosity means the oil cannot adequately separate the gear surfaces, resulting in higher friction and accelerated wear.

To mitigate the risks of gear pitting and peeling, it is essential to engage in regular maintenance and careful monitoring of these factors. Ensuring that the gear material meets the required standards, maintaining proper gear hardness, addressing any defects, ensuring high gear accuracy, using the correct grade of lubricating oil, and maintaining appropriate oil levels can all contribute to the longevity and efficiency of the excavator reducer. By paying attention to these aspects, we can significantly reduce the likelihood of gear pitting and peeling, ensuring smooth and efficient operation.

By understanding the fundamentals and maintaining proper care, you can keep your excavator’s reducer in top-notch condition, ready to tackle any job with ease!