K3V180DTP-9N05 Hlavní hydraulické čerpadlo rypadla VOLVO EC360

Working principle of Hydraulic Main Pump

Rypadla jsou běžným typem stavebních strojů a zařízení, které se hojně používají při zemních pracích, dopravě, nakládání a dalších inženýrských činnostech. Hydraulické čerpadlo je jednou ze základních součástí rypadla, která je zodpovědná za zajištění stabilního hydraulického výkonu. Jak tedy hydraulické čerpadlo bagru funguje? Nyní si podrobně představíme princip fungování hydraulického čerpadla rypadla.

The Hydraulic Main Pump mainly consists of the hydraulic pump body, transmission shaft, coupling, and pump control system. Its working principle is to convert mechanical energy into hydraulic energy and transmit it to other hydraulic actuators through the hydraulic system to achieve the action of the excavator.

Related Hydraulic Main Pump We Supply :

Hlavní hydraulické čerpadlo

The Hydraulic Main Pump body is the core component of the excavator hydraulic pump, usually using a gear pump or a plunger pump.There are a pair of gears or plungers that mesh with each other inside the hydraulic pump body, forming a certain volume inside the pump body. When the transmission shaft of the hydraulic pump rotates, the gear or plunger rotates accordingly, thereby changing the volume of the pump chamber.

When the volume of the pump chamber increases, the pressure inside the pump decreases, and hydraulic oil enters the pump chamber through the suction port; When the volume of the pump chamber decreases, the pressure inside the pump increases, and hydraulic oil flows out of the pump chamber through the pressure port. Through this working principle, the Hydraulic Main Pump can continuously suck in and discharge hydraulic oil, forming stable hydraulic energy.

The Hydraulic Main Pump needs to be linked with other systems during operation, which requires the action of the transmission shaft and coupling. The transmission shaft transfers the power of the engine to the hydraulic pump, causing it to rotate; The coupling connects the hydraulic pump to the transmission shaft to ensure their synchronous operation. The control system of the hydraulic pump is responsible for controlling the start, stop, and working pressure parameters of the hydraulic pump. When the excavator needs to work, the control system will send a signal to the hydraulic pump to start and provide the corresponding working pressure.

When the excavator does not need to work, the control system will stop the operation of the hydraulic pump to save energy. In general, the working principle of Hydraulic Main Pump is to convert mechanical energy into hydraulic energy through the Hydraulic Main Pump body, and transmit it to other hydraulic actuators through the hydraulic system to achieve the action of the excavator.

Provoz hydraulická čerpadla requires the coordination of the transmission shaft and coupling, and the control system controls its start, stop, and working pressure parameters. The working principle of the excavator hydraulic pump is simple, but it is the key to the normal operation of the excavator. Only by ensuring the normal operation of the hydraulic pump can the efficiency and performance of the excavator be improved. Therefore, in the operation and maintenance process of excavators, it is necessary to have a clear understanding of the working principle of Hydraulic Main Pumps and carry out timely maintenance and upkeep to ensure the normal operation of excavators.

Hlavní hydraulické čerpadlo

S více než 1000 typy kyvných ložisek, které jsou k dispozici, poskytujeme jedinečný výběr a flexibilitu.Ať už hledáte ložiska CAT, KOMATSU, HITACHI, HYUNDAI, KOBELCO, VOLVO, DOOSAN, JCB, CASE, LIEBHERR, LIUGONG, SANY, YUCHAI, XCMG, SUMITOMO nebo jiné přední značky, máme pro vás vše. 

Pro více informací kontaktujte specialistu na náhradní díly na +8613023501555.